Monthly Archives: April 2018

The “Milkman’s” Workbench

Out of stock.  Another batch is planned this fall.  If interested contact us to reserve a copy. 

After making several portable workbenches for our plane making classes for use by students, we have received numerous requests for the complete bench by customers. In response to these requests, we have added them to our product line.  Dubbed the “milkman’s workbench” by Chris Schwarz in his Popular Woodworking article in June 2013, this tabletop bench is designed to clamp to any solid surface and is equipped with a full range of clamping options in a compact footprint. Here are the details:

  • Overall dimensions of the bench less the screws are 30″ long, 7 3/8″ wide, and 1 5/8″ thick.
  • The bench is built of European beech, including the screws.
  • Clamping capacity:  Wagon vice between dogs is 23 1/2″, Moxon style front vice 19 1/2″ wide x 1 7/8″ deep.
  • Jaw liner applied to wagon vice jaws and back of Moxon vice.
  • Screws are 1 1/2″ octagonal grips and are threaded at 1 1/4″ diameter with 5 threads per inch.  The wagon vice has a wood garter underneath so the vice jaw travels with the screw.
  • Two front screws can be positioned in any of the four tapped holes in the front apron.
  • Steel angle iron brackets are mounted to the end and back for mounting to the work surface with “F” style clamps.
  • Bench dogs are 3/4″ diameter and made of ash.  They have ball detents to secure them in the holes.Two will be included.  More details below.
  • The front corners are pegged bridle joints, and there is a lag screw through the front rail into the bench for strength to resist clamping forces of the front vice.
  • Two coats of oil-varnish finish will be applied.  Screws will be waxed.
  • An extra piece of jaw liner is provided for those who wish to add it to the dog and Moxon screw faces.

One change we made was to replace the square dogs with 3/4″ round dogs from Time Warp Tools. The square dogs are somewhat delicate and subject to compression failure on the front faces.  The larger dogs will be more robust and the round holes will add the versatility of various woodworking accessories in the market.  These dogs are made of ash, and have flat clamping faces that are slightly angled to give good grip at the top.  They feature a ball detent to hold them in place at any setting desired.

Price for the complete bench is $495, plus shipping costs. Now available in our store.

We also offer the screws, made by Acer-Ferrous Toolworks, for those who wish to build their own bench.  They are available here.

“Milkman’s” Workbench

 

Wagon Vice.  Note pegged corner joint and jaw liner.

 

Angle iron bracket for mounting bench.

 

Moxon vice

 

 

Jaw liner for better grip.

 

Branded logo

 

Round dog holes

Stool Kit from Acer-Ferrous Toolworks

Paul Peters, of Acer-Ferrous, has developed a wooden screw and nut system that is designed for use as a shop stool.  The large 2″ thick by 8 1/2″ square nut is sized with room for four splayed legs to be attached through tapered holes. (Very much like a Windsor chair seat,or staked furniture.)  The threaded stem is 2 1/2″ diameter and threaded at two threads per inch.  The top end has a 2 1/2″ long by 1 1/2″ diameter tenon for mounting a seat on by boring a hole through and wedging from the top.  The stem is 15″ long overall with 12″ of threaded length, allowing for about 9″ of height adjustment.  Also included is a jam nut, which is spun against the base nut once the desired seat height is set.  It will keep the seat from turning while in use and also removes any play in the screw and nut.  All components are made of maple.

Price for the kit is $110.  They are available now in the store.

Assembled screw and nut.

Jam nut.

Tenon for mounting seat.

Sample stool made from kit. Jam nut not shown.